Skip to main content

Puddle Study

Unit Plan: Broken Water CycleTime: 15-20 minutes per day after a spring or fall rain. 30 minutes in class. Setting: School and Schoolyard
K-2, 3-5Water & Watersheds
icon quick tip

Use the filter to limit your results.


Students will know how to map puddles on their school property and investigate what lives in the puddles.  



    • 20 or more feet of string
    • Scissors
    • Black marker
    • Ruler
    • Glass or clear plastic jar
    • Turkey baster (if available) or paper cup
    • Dried grass
    • Microscopes for viewing puddle microbes, along with slides and eye dropper (if available)

      Optional mapping activity:

      • Clipboards, pencil per pair of students
      • Simple line map of school building and schoolyard

    Puddle Inventory
    While most students typically know where puddles are in their schoolyard, it is still a helpful introductory exercise to conduct some sort of “puddle inventory”. You can make a very simple map of a schoolyard by tracing an aerial photo (which can be found easily on GoogleEarth). Then, give the students a copy of the map, head outside and ask them to mark where they find puddles. They can use a different color for large puddles and small puddles, or maybe for puddles on pavement or grass/mud. If you choose not to have the students do a map, you can ask them to tally the number, size and type of puddles in the schoolyard. By looking at the slope and surface of the schoolyard, this inventory can lead to interesting discussions about why some puddles are in some places, why some puddles are large or small, or why some have clear water and others have brown water.

    Measuring Puddles’ Rate of Disappearance
    After doing an inventory of puddles in the schoolyard, ask students to choose puddles to compare the rate of “puddle disappearance”. Suggest that they choose the 2 puddles that they think will disappear the quickest and the slowest. Do not let them use the word “disappear” for what is happening to the water. The puddle is disappearing, but not the water. Be sure to ask them to think about where the water will go, since it has to go somewhere. Their knowledge of the water cycle will likely lead them to say that the water evaporates, but remind them that some of the water will also seep through the bottom of the puddle.

    Once they have chosen which puddles they will measure, have them use the string to measure the circumference of the puddle. Have a data recorder write down the size of each puddle, the time it was recorded and the weather conditions (sunny, cloudy, rainy, clear, etc). Then a few hours later (or the next morning), collect the same data.

    Once the puddles have disappeared collect the data and discuss what happened and why. You may have to brainstorm with them which variables impact evaporation (temperature and sunlight) or infiltration (impacted by how wet the surface already is, or whether water can seep down). The class may decide to conduct the same experiment after the next rainstorm if they come up with more questions.

    Collecting puddle water sample
    Puddles are, in fact, short-lived freshwater habitats. Such habitats can indeed provide a place for organisms to live. A puddle will likely have several types of microorganisms, like algae bacteria protists and fungi. While many of these may be too small to see without powerful microscopes, children can likely look at strings of algae under a simple microscopes. If the puddle is there long enough, you could have insects and or frogs lay there eggs in the puddle (in fact, puddles can be pesky breeding grounds for mosquitoes!). There can also be other small arthropods like insect larvae, daphnia, water mites, tardigrades or copepods (see simple identification drawings at the end of this lesson).
    Using a turkey baster or paper cup, collect a sample of puddle water. Getting dirt from the bottom of the puddle is fine, but try to not have too much sediment in the sample. Put the sample in a clear glass or plastic jar.

    Hay infusion of puddle water
    Once you have collected samples of puddle water, label them with the name of the puddle and the date collected. Then find some dried grass (that has not been sprayed with herbicides or pesticides) and submerge a couple straws in the water. The hay will provide nutrients and sugars for bacteria in the water. Then, the bacteria will provide food for protists in the water, thus increasing the density of protists in the sample. These protists, often being larger than bacteria, can then be observed by students. Once a day use a eye dropper to “blow” bubbles in the water in order to provide oxygen for the protists. After about one week, students can then observe the protists. As this sample contains many species of bacteria, most of which are probably harmless. However, for precaution sake, it is important to avoid touching the sample water and thoroughly wash any surfaces. If the class wound like to continue the growth of the hay infusion, add more puddle water and hay each week. However, do not put too much hay, as this will cause an explosion of bacteria, whose waste will pollute the water. Lastly, hay infusions can also be done on any freshwater sample.

    Observe and draw puddle microbes, insect larvae and other life!
    Using an eye dropper, remove a drop of water from the sample (you can try comparing drops from the top, medium and bottom layers) and place that drop of water on a slide to view under a compound microscope. You can also look into the jar and try to catch visible arthropods like daphnia or copepods. Then, using the identification table on the following pages, ask students to identify and draw the organisms they find. You can discuss what the food chains or food webs in the sample are, or you can make comparisons between the organisms from different puddles.

    Ask students to draw a puddle ecosystem during a rainstorm, 5 minutes after a rainstorm, 2 hours after a rainstorm, and 2 days (or more) after a rainstorm. Use the rubric below to evaluate their responses.

    Benchmarks for Science Literacy

    2B Mathematics, Science and Technology

    NYS Standards

    MST 1 - Mathematical analysis, scientific inquiry, and engineering design, MST 4- Physical setting, living environment and nature of science, MST 6- Interconnectedness of mathematics, science, and technology (modeling, systems, scale, change, equilibrium, optimization)
    Next Generation Science Standards

    Science and Engineering Practices

    Asking questions and defining problems, Planning and carrying out investigations